Casting Molds - Page 5 - Mega Sale! Save up to 29%


Mega Sale! Up to 29% off on Casting Molds at India silver beads, Page 5. Top brands include PMC Supplies LLC, UJ Ramelson Co, Make Your Own Gold Bars, OUBO, FUNSHOWCASE, Sntieecr, OTOOLWORLD, Alenka D., Maslin, Generic, LYNICESHOP, & Pen Kit Mall. Hurry! Limited time offers. Offers valid only while supplies last.



Large - Gun 3D Graphite Ingot Mold for Precious Metal Casting Gold Silver Copper Melting
By PMC Supplies LLC
In Stock
$59.45

mpn: 3DMLD-0018,

4.1 out of 5 stars with 18 reviews
Gun 3D Graphite Ingot Mold - 75 mm x 75 mm x 20 mm - This mold is ideal for casting a 3D image. Works great with Gold, Silver, Copper, Aluminum, Tin and other precious and non precious metals. Gold ingot for photo reference only.Casts a unique three dimensional ingot. Works with gold, silver, copper, and more. Measures 75 mm x 75 mm x 20 mm.


Delft Clay Casting Set with 100 mm Rings
By UJ Ramelson Co
In Stock
$132.95
$131.00
You Save: 1%

mpn: clay100,

4.9 out of 5 stars with 34 reviews
Product Description: The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. The process was invented by Hans Karreman, a Dutch goldsmith. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc. Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used. Since this is a


Conical Mold + 1Lb Chapman Flux & Free Thinner- Assy Gold Silver Black Sand Cone
By Make Your Own Gold Bars
In Stock
$49.95

mpn: Mini Conical + Flux, ean: 3530030082914,

4.0 out of 5 stars with 43 reviews
This Graphite Conical Mold is Cone shaped, 1-1/2'' across the top and 1'' Deep. Perfect for smelting small amounts of Black sands with your favorite flux or just making buttons. This mold has one cavity, This also includes 1 Pound of Hank Chapmans Flux with 2 table Spoons of Chapman Flux thinner. The ruler is not includedSolid High Dinsity Graphite Mold. Conical Shape so your Gold drops to the bottom when smelting. 1 LB Chapman Flux w/ Free Chapman Flux Thinner.


4" Marble Glassblowing Sphere Graphite Mold
By PMC Supplies LLC
In Stock
$90.50

mpn: BMLD-0012,

4.4 out of 5 stars with 24 reviews
Made from high-density, fine grain graphite. Lasts for 30+ pours! Smooth cavity finish. Creates 4'' half-spheres.Please contact us with any questions. Thanks for looking!Creates 4'' half spheres. Lasts for 30+ pours. Made from high density fine grain graphite with a smooth cavity finish.


200 oz Gold KitKat Bar Mold 100 oz Silver High Density Graphite Loaf Scrap
By Make Your Own Gold Bars
In Stock
$174.93

mpn: 200 oz KitKat Mold, ean: 0082889387915,

4.9 out of 5 stars with 16 reviews
Inside size of the mold is apx 6-1/8'' X 2'' X 1-11/16'' deep. Machined graphite ingot with the slight wall taper for better metal removal. This Mold is great for making old style loaf bars. The weight of each bar depends on what metal your working with and how full you fill the cavity. Full to the top will give you a apx 200 Troy ounce Gold Bar. Silver Dime shown in the pic is not included. Silver bar will be about 100 oz. Maybe a bit more.Inside size of the mold is apx 6-1/8'' X 2'' X


500 oz Troy Ounce Silver Kit Kat Graphite Ingot Mold for Melting Casting Refining Scrap Jewelry
By PMC Supplies LLC
In Stock
$685.00

mpn: SM500-TOZ-KK,

4.8 out of 5 stars with 49 reviews
500 Troy Ounce Kit Kat Graphite Ingot Mold for Silver! Made from High Density Fine Grain Graphite Lasts for 30+ pours! Smooth cavity finish Designed for easy ingot removal with 15 degree tapered sides Dimensions: Outside: 3'' x 14'' x 6'' Inner: 1.985'' Depth x 3.25'' x 11'' at bottom Custom Engraving and Sizes Available on request!500 Troy Ounce Silver Mold. High Density Graphite. Tapered Sides for Easy Ingot Removal. 30 + Pours. Easy To Use.


OUBO Brand 103LR Double-Lock 50000 RPM Brushless Micro with 9N.cmTorque Hand Tool
By OUBO
In Stock
$140.99

mpn: OUBO-042809, ean: 0792057317551,

4.1 out of 5 stars with 59 reviews
RPM: Max 50000rpmPortable and compact size. RPM: Max 50000rpm. Double-lock. High-Torque provides smooth operation and powerful performance with less operator fatigue.. Torque: 9.0N.cm.


Funshowcase Epoxy Resin Casting Silicone Molds Jewelry Making Supply 26-Count, Large Pack of 9 Trays Pyramid Cone Cube Sphere Crystal Stones Diamond Gem, Make Soap Candle Wax Crayon Concrete
By FUNSHOWCASE
In Stock
$19.99

mpn: A96,

4.6 out of 5 stars with 29 reviews
For multimedia, bath bombs, polymer clay, liquid polyclay, epoxy resin, soap, candle, wax, plaster, isomalt, chocolate, mousse, candy melt and more materials crafting jewelry projects or baking ideas etc.Include 2inch ( 5.1cm ) square base pyramid and 2.6inch ( 65cm ) triangular base pyramid, 3inch ( 75mm ) cone prism, 2inch ( 48mm ) height diamond, 2.7inch ( 70mm ) sphere ( can make half sphere as well ), 2inch ( 50mm ) cube ( can make thinner square coaster ) , assorted sizes crystal rock


Sntieecr 223 Pieces Resin Silicone Casting Molds Full Kit with Resin Molds, Sandpaper, Fine Glitter, Glitters Sequins Powder, Dry Flower and Tools Set for Jewelry Making, Resin Epoxy, Earring Making
By Sntieecr
In Stock
$49.99
$43.99
You Save: 12%

mpn: ST-0085, ean: 0796826181800,

4.0 out of 5 stars with 48 reviews
Sntieecr 223 Pieces Resin Molds, Decoration Supplies and Tools Kit for DIY Jewelry Craft Making Features: Perfect kit for resin craft making lovers. All abundant kit good for your DIY any amazing craft easily, you can use it to create your own unique and special craft with a variety of decorations. It will improve your creation and imagination. Enjoy resin craft making! You can also use this kit to make a lovely and beautiful craft for your lovers, friends, family, classmates, this meaningful gi


OTOOLWORLD Gold Silver Graphite Ingot Mold Mould Crucible for Melting Casting Refining (5.5kg)
By OTOOLWORLD
In Stock
$38.99

mpn: OTOOLWORLD, ean: 0695288512651,

4.6 out of 5 stars with 16 reviews
OTOOLWORLD Gold Silver Graphite Ingot Mold Mould Crucible For Melting Casting RefiningHigh quality graphite ingot mold. you can select the size you need, and the size you can find on the listing photo. for gold and silver melting after the formation of gold and silver pieces. can also be used as graphite crucible melting into non-ferrous metals, test analysis, as the ingot mold and other purposes. the capacity is an approximate number= inside Length*Width*Height*0.9.


Funshowcase Cabochon Gem Pendant Earrings Epoxy Silicone Molds Jewelry Making Supply Kit Pack of 411 Lot, Polyclay Crafting
By FUNSHOWCASE
In Stock
$39.99

mpn: A2,

4.3 out of 5 stars with 40 reviews
Instructions: 1.Place carbonized charcoal around 1/6 of the container. 2.Cut and layer a dried bass moss as a sheet, which should be thin. -- see picture ''1'' of ''FULL SET'' 3.Layer organic soil and soil mix. The soil mix and be layered after organic soil as plant cover. The place you plan to plant later should be 3 times thicker then other place. -- see picture ''2'' of ''FULL SET'' 4.Water with SQUEEZE BOTTLE and Sprayer ( provided in the reusable tool set or full set ). Water carefully,


Two in one !!! New!!!Multi Tunnel Ear Plug Piercing Mold. Gauge Plug Egg Pear Shape. AAA.
By Alenka D.
In Stock
$40.00

mpn: AA, ean: 0769140471339,

4.4 out of 5 stars with 7 reviews
Two in one !!! NEW!!!Multi Tunnel Ear Plug Piercing Mold. Gauge Plug Egg Pear Shape. AAA. Egg Pear Shape sizes 2g - 6mm(5 x 8mm), 0g - 8mm(7 x 11mm), 9/16'' - 14mm(13 x 20mm),1/2'' - 12mm(11 x 16mm),5/8'' - 16mm(15 x 22mm),00g - 10mm(9 x 14mm) Black Plugs Sizes. SIZE 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm, 18mm, 20mm Free USA shipping! We are selling silicone molds. You can make your own rings, pendants, earrings, tunnels even chocolate candy with our clear silicone molds. You need only ICE RESIN


Large - Botonee Cross 3D Graphite Ingot Mold for Precious Metal Casting Gold Silver Copper Melting
By PMC Supplies LLC
In Stock
$59.45

mpn: 3DMLD-0003,

4.7 out of 5 stars with 46 reviews
Botonee Cross 3D Graphite Ingot Mold - 75 mm x 75 mm x 20 mm - This mold is ideal for casting a 3D image. Works great with Gold, Silver, Copper, Aluminum, Tin and other precious and non precious metals.Casts a unique three dimensional ingot. Works with gold, silver, copper, and more. Measures 75 mm x 75 mm x 20 mm.


Sale!Multi-Clear-silicone Ring Molds 3pc size 6,7, 8, (A40)
By Alenka D.
In Stock
$27.50

mpn: LE, ean: 0768430485544,

4.8 out of 5 stars with 10 reviews
Sale!Multi-Clear-silicone Ring Molds 3pc size 6,7, 8, (A40) Processing time is 3-5 days. We are selling silicone molds. You can make your own rings, pendants, earrings, tunnels even chocolate candy with our clear silicone molds. You need only ICE RESIN or your favorite resin. My molds are made from high quality silicone that is made in USA. Transparent silicone is in superior quality rather than pink or blue, therefore it can last you way longer. This beautiful clear-translucent jewelry


Maslin CYKY-0602 cemented carbide mold Powder hydraulic press machine laboratory dedicated mold
By Maslin
In Stock
$1,350.00
$964.19
You Save: 29%

mpn: MLS-727FB83A4374B44C6A29CB42FE0FB780, ean: 0755782820093,

4.4 out of 5 stars with 49 reviews
Mould sample preparation steps:Mould use and maintenance:Each time the mould is used, the mould surface should be wiped clean with a dust-free paper to prevent the anti-rust oil on the mold from affecting the test results of the sample. When pressing, be careful not to exceed the maximum pressure of the mould. After the mould is used, the sample on the mould should be cleaned in time to avoid corrosion of the mold. If it is not suitable for a long time, the mould should be coated with anti-rust


Maslin CYKY-0603 laboratory cemented carbide mold manual circular hydraulic press mold square split mold
By Maslin
In Stock
$1,350.00
$964.19
You Save: 29%

mpn: MLS-FBE8AB7DDE8AA19211D38F67C43CD205, ean: 0755782819981,

4.9 out of 5 stars with 29 reviews
Mould sample preparation steps:Mould use and maintenance:Each time the mould is used, the mould surface should be wiped clean with a dust-free paper to prevent the anti-rust oil on the mold from affecting the test results of the sample. When pressing, be careful not to exceed the maximum pressure of the mould. After the mould is used, the sample on the mould should be cleaned in time to avoid corrosion of the mold. If it is not suitable for a long time, the mould should be coated with anti-rust


Yaley Resin Jewelry Reusable Plastic Rectangle Mold 6.5 x 7 Inches (12 Pack)
By Generic
In Stock
$131.72

mpn: MI01368243_12,

4.2 out of 5 stars with 21 reviews
Yaley Resin Jewelry Reusable Plastic Rectangle Mold 6.5 x 7 Inches ( 12 Pack)12 Pack.


Mini Electric Melting Furnace,PID Digital Melting Furnace,for Melt Repair Gold Silver Copper and Other Noble Metals
By LYNICESHOP
In Stock
$299.99

ean: 0692232699024,

4.8 out of 5 stars with 50 reviews
Specification Power:1500W Voltage:AC110V,50Hz Measurement accuracy: +0.5%FS Working environment: 0-50°C, 30-85%RH Max.Heating temperature: 1150℃ Capacity of the crucible:130.35cm3 External dimensions of the crucible: diameter:6.5 Height: 12.5 Internal dimensions of the crucible: diameter:3.8 Height: 11.5 Temperature Control system:the PID The PID module has two functions:to measure and to control the heating Dimensions:( LxWxH) 31x36x37cm Note:In order to ensure a long durability and a good


Hobby-CAST Block Silicone Mold for Pen Blank Color Casting
By Pen Kit Mall
In Stock
$48.99

mpn: HC SILICONE BLOCK MOLD,

4.5 out of 5 stars with 42 reviews
HOBBY-CAST PEN BLANK BLOCK MOLD CAST A SOLID BLOCK 1'' X 6 X 5.25 GREAT FOR COLOR CASTING PEN BLANKSHOBBY-CAST CAST A SOLID BLOCK 1'' X 6 X 5.25. DOES NOT NEED MOLD RELEASE. GREAT FOR COLOR CAST PEN BLANK CASTING. COMPATIBLE WITH ALL TYPES OF RESIN.. Tray is flexible for easy release, so no more struggling to get your blanks out - quickly and easily pop them out..


Smelting Conical Mold + 1Lb Chapman Flux & 2 Tbsp Anhydrous Borax Assy Gold Silver Black Sand
By Make Your Own Gold Bars
In Stock
$39.95

mpn: 1.5x1.25x 1.00 + Borax, ean: 3530030084963,

4.7 out of 5 stars with 10 reviews
This Graphite Conical Mold is Cone shaped, 1-1/2'' across the top and 1'' Deep. Perfect for smelting small amounts of Black sands with your favorite flux or just making buttons. This mold has one cavity, This also includes 1 Pound of Hank Chapmans Flux with 2 table Spoons of Anhydrous Borax. The ruler is not includedSolid High Dinsity Graphite Mold. Conical Shape so your Gold drops to the bottom when smelting. 1 LB Chapman Flux w/ Mold. 2 table spoons of Anhydrous Borax.



Viewing Page 5 of 9

View more products in Jewelry Casting Supplies.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - indiasilverbeads.com. All Rights Reserved.