Casting Tools - Page 2 - Blowout Sale! Save up to 76%


Blowout Sale! Up to 76% off on Casting Tools at India silver beads, Page 2. Top brands include OTOOLWORLD, Krohn, PMC Supplies LLC, GRS, Cast Masters, YIHUI, Make Your Own Gold Bars, Paaz Jewelry Supply, SRS, Uttiny, Hardin, Generic, & Salamander Supper A. Hurry! Limited time offers. Offers valid only while supplies last.



OTOOLWORLD 99.9% Purity Graphite Ingot Block EDM Graphite Plate Milling Surface (100MMx100MMx30MM)
By OTOOLWORLD
In Stock
$23.99

mpn: 100x100x30, ean: 0695288492748,

4.1 out of 5 stars with 30 reviews
OTOOLWORLD 99.9% Purity Graphite Ingot Block EDM Graphite Plate Milling Surface (100MMx100MMx30MM)size: 100MMx100MMx30MM. Tolerance range:0~0.05MM. we have other size graphite plate, you can find on my store.


Silver Electroplating Solution 1 Quart Jewelry Plating Bath Metal Pieces
By Krohn
In Stock
$39.50

mpn: 400-055, ean: 0706098398158,

4.2 out of 5 stars with 59 reviews
PRODUCT DESCRIPTIONKROHN READY-TO-USE SILVER ELECTROPLATING SOLUTION is a cyanide type plating bath which imparts a bright silver plate. Articles to be plated must be cleaned before plating. Extra care is necessary to insure the removal of all polishing rouge, oil, grease, finger prints, etc. For best results, the pieces to be plated should be cleaned at 5-6 volts in a KROHN TIVACLEAN solution (8 Oz per Gallon of water heated to 160 - 180 F) Fallowed by a cold water rinse. Solution 1 Qt (946 ml)


ProCast High Temp 20 Oz 400 DWT Platinum Melting Casting High Back Crucible Dish
By PMC Supplies LLC
In Stock
$48.99

mpn: CRU-0121,

4.0 out of 5 stars with 27 reviews
For high melting temperatures. The ProCast high back dish is designed to prevent overflow during torch melting. Designed with a groove for tong handling.Dimensions: 3-3/4'' OD, 3'' H Tall Back, 2'' H Short Front, 3'' ID.Size: 20 oz. (400 DWT).Please contact us with any questions. Thanks for looking!The ProCast high back dish is designed to prevent overflow during torch melting. Designed with a groove for tong handling; used for high melting temperatures. Size: 20 ounces (400 DWT).


BRIGHT NICKEL ELECTROPLATING SOLUTION 1 Quart JEWELRY PLATING BATH METAL PIECES
By Krohn
In Stock
$38.50

ean: 0787639155393,

4.2 out of 5 stars with 56 reviews
BRIGHT NICKEL ELECTROPLATING SOLUTION imparts a bright nickel electroplate when used in accordance with the fallowing instructions. The recommended plating bath temperature is 70 F to 75 F. Nickel plate articles using 2 volts or 10 to 20 amps per square foot. Articles to be plated must be cleaned before plating. Extra care is necessary to insure the removal of all polishing rouge, oil, grease, finger prints, etc. For best results, the pieces to be plated should be cleaned at 5-6 volts in a KROHN


GRS® Tools 004-804 Standard Quick Change Tool Holder Package of 3
By GRS
In Stock
$22.92

mpn: GRS 004-804, ean: 0640823559998,

4.1 out of 5 stars with 18 reviews
Get a few extra holders to keep your tools organized. Works with any GRS ''QC'' Quick Change compatible tool. Approximately 0.0500 lbs. (0.0227 kg).


Cast Masters USA - 5 Kg Foundry Clay Graphite Crucible Furnace Torch Melting Casting Refining Gold Silver Copper Brass Aluminum
By Cast Masters
In Stock
$99.95
$23.98
You Save: 76%

mpn: 43237-2, ean: 0712038835539,

4.7 out of 5 stars with 47 reviews
CAST MASTERS 5 Kg Clay Graphite Foundry Crucible Graphite Foundry Crucibles are made from a combination of graphite and clay, these crucibles are recommended for melting your precious, or non-precious metals and can handle large batches of material. Their thick inner walls can handle direct heat and open flame foundries. They can be used with our propane melting furnaces as well as a standard torch method. Rated to withstand temperatures up to 1499°F - 2900° F (800 C - 1600°C). Outside Dimens


36" Black Carbon Bent Hinged Foundry Crucible Tongs for Casting Precious Metals
By PMC Supplies LLC
In Stock
$59.95

mpn: TONG-0036,

4.8 out of 5 stars with 60 reviews
Measuring at 36'' in total length, these sturdy carbon black tongs are ideal for handling crucibles when melting down precious metals. Tongs will firmly grip onto the lip of the crucible. Safety First: Always wear heat-resistant gloves and face protection when handling hot materials. Intended for adult use only.Please contact us with any questions. Thanks for looking!Measures: 36'' long. Tongs firmly grip crucible lip. Always wear heat-resistant gloves and face protection when handling hot mater


2 PCS Package 3 Kilo Capacity Graphite Melting Crucible
By YIHUI
In Stock
$60.00

mpn: G.GM.3000SH, ean: 0739450576123,

4.9 out of 5 stars with 42 reviews
Size: 75 x H170mmPackage quantity: 2 PCS Outside polishing with inside non-polishedMade high purity graphie with 1.85 density. Low ash content to reduce oxidation maximally. By CNC processing in order to ensure accuracy.


OTOOLWORLD 10KG Clay Graphite Crucible Foundry Cup Furnace Torch Melting Casting Refining Gold Silver Copper Brass Aluminum Lead Zinc and Alloys
By OTOOLWORLD
In Stock
$39.99

ean: 6952884909259,

4.2 out of 5 stars with 46 reviews
OTOOLWORLD 10KG Clay Graphite Crucible Foundry Cup Furnace Torch Melting Casting Refining Gold Silver Copper Brass Aluminum Lead Zinc and AlloysThis crucible has strong corrosion resistance to acid and alkaline solution, and has excellent chemical stability and thermal shock resistance.. Melting Casting Refining Gold Silver Copper Brass Aluminum Lead Zinc and Alloys. Can be used in Fuel Furnaces, Medium/High Frequency Heat Induction Furnaces and Kilns Furnaces, Biological pellet furnaces,


Gold & Silver Melting Kit - 5 Crucibles, Tongs, 5oz Mold, Chapman Flux, Borax-Gold Recovery-Melting-Smelting
By Make Your Own Gold Bars
In Stock
$49.00

mpn: Max Kit 5566, ean: 3530030071314,

4.2 out of 5 stars with 37 reviews
Your set will include: - One pair of good tongs (as shown in the pictures) - A set of 2 small graphite crucibles that are 1-1/8 wide X 1-1/8'' tall (Outside Dimension) and the (Inside dimension) is 3/4'' wide X 15/16'' tall. Can hold up to 3 oz of 24K Gold & about 1.5 oz of Silver or Copper.- A bag of apx 2 Table Spoons of Chapman Flux.- A bag of apx 2 Table Spoons of Anhydrous Borax.This kit can be used to clean up your gold from black sands (80% Gold or better) also to clean up Gold, Silver or


GRS® Tools 004-901-ATSS Airtact 901 Stainless Handpiece
By Paaz Jewelry Supply
In Stock
$377.00

ean: 0640823559967,

4.7 out of 5 stars with 21 reviews
Description The Palm Touch Element creates a simple interface between you and your pneumatic engraving system. With the Touch Element, you no longer depend on a foot control. Now you can have precise actuation that feels more natural. Instead of using a foot pedal, pressure is applied to the Palm Pad (rubber end) located on the back side of the handpiece to activate. The Palm Pad can be customized for increased sensitivity. Specifications Requires a compatible GRS engraving system using


JEWELRY CASTING STONE IN PLACE STONE CAST INVESTMENT POWDER SRS UK 50 POUNDS (55Lb. UPS 12x12x10)
By SRS
In Stock
$125.95

mpn: 0310-5550, ean: 0806149974833,

4.6 out of 5 stars with 21 reviews
Using STONECASTTM the Jewelry caster can set diamonds in the wax before casting rather than in the metal afterwards thus improving productivity. STONECASTTM can be used for Diamonds and CZ's stones, has the following features and benefits: Pre-blended investment powder for stone casting - no need to make additions Provides heat shield for diamonds up to mould temperature of 630°C Setting time adjusted to give enough time for mixing and vacuuming without rushing Fluid slurry and flash setting


Pre-Mix 5lb Chapman Flux & Thinner Combo-Refine Gold-Silver-Smelting-Assay-Recovery
By Make Your Own Gold Bars
In Stock
$79.95

mpn: 5Lb Pre-Mix Chapman Combo, ean: 3530030084512,

4.2 out of 5 stars with 23 reviews
This is 5 Lb of the famous Hank Chapman Jr Refining Flux & 1/2 Lb of his Thinner comes Pre-Mixed for you. This is pre-mixed Flux and ready for you to add your Black Sands, Ore, Gold, Silver, Computer Parts, Scrap Gold and smelt. This is also a great assay mix. Includes Borax, Soda Ash, Silica & Manganese. This package has the Thinner already added for you. Mix well before use.I find it always best to pour when your material is like water coming out. It makes for better pours, better looking bars


Uttiny Gold Melting Furnace, with Graphite Crucible 1400W 2KG Automatic Gold, Silver, Copper and Aluminum Melting Furnace for Refining Casting Gold Silver Copper Jewelry Making Precious Metals (2KGS)
By Uttiny
In Stock
$319.99

mpn: Melting, ean: 7544888126962,

4.2 out of 5 stars with 59 reviews
Specifications: voltage:110/ 220V Color:red Frequency:50/60hz Capacity:2kg Weight 9kg Packing size 22*22*40cm Maximum temperature:2000 F (1100 C) Package Includes: 1 x Melting Furnace 1 x Graphite Crucible 1 x Pliers 1 x Product Manual【Large Compacity】:1400W Working Power And 2kgs Of Compacity, Inner Temperature Can Be 1100℃, Metals Could be Melted Completely in 40-48 Minutes.. 【Graphite Crucible】:Grooved graphite crucible is designed for easy removal from the furnace using special


GRS® Tools 003-520MPV Attachment Set of 30 for Multi-Purpose Vise
By GRS
In Stock
$147.50
$145.83
You Save: 1%

mpn: 003-520MPV, ean: 0640823559684,

4.5 out of 5 stars with 12 reviews
Includes 8 small pins, 4 flat square pins, 2 rectangular inset-curve pins, 4 thick round inset pins, 8 rubber coated pins, and 2 leather-faced ring clamp pins in molded base. With a variety of pins that fit the upper jaw plates of every GRS Block, you can now instantly solve workholding problems and start working sooner.You can now instantly solve workholding problems and start working sooner. With a variety of pins that fit the upper jaw plates of every GRS Block.


Hardin 2 Kg Crucible for HD-234SS - HD-234 CR2kg-2PK - Pack of 2
By Hardin
In Stock
$74.40

mpn: HD-234 CR2kg-2PK, ean: 0645710011832,

4.4 out of 5 stars with 9 reviews
These are our Hardin 2 kilogram high purity graphite crucible. These crucibles is by far our most common crucible sold individually or in a furnace kit. Each crucible can be used to hold your precious metals such as silver, gold, and copper while they are melted at high temperatures needed in order to cast into bars and ingots. Has a little groove at the top to easily grab with tongs. It's recommended that you never fill the crucible to more than a 2/3 to avoid spillage. Tried and tested on the


Smith Little Torch Torch Kit 5 Tips #3-7 Acetylene Propane Natural Gas MAPP Hydrogen Jewelry Repair Metal Braze Solder Model 23-1001D
By PMC Supplies LLC
In Stock
$149.94

mpn: 55-1011,

4.4 out of 5 stars with 21 reviews
The Smith Little Torch is designed for jewelry repair and manufacturing. Supplied in a display box, the Little Torch is engineered for light brazing, soldering, and it is also capable of casting up to three troy ounces of gold or silver. Makes a thread-thin flame that will heat up to 6300°F. Made in the U.S.A. This system can be used with your choice of fuel: Acetylene, Propane, Hydrogen, Natural Gas, MAPP fuels, and Oxygen. 23-1001D includes one torch, size #3-7 curved tips (5 total), 8'


100 Oz Deluxe Tabletop QuikMelt Topper Kit Tongs Flange Crucible Jewelry Making Metal Furnace Kiln Tools
By PMC Supplies LLC
In Stock
$104.95

mpn: FUR-0130,

4.8 out of 5 stars with 12 reviews
This Kit Includes: (1) 100 oz Furnace Flange (1) 100 oz Graphite Crucible (1) Pair of 13'' Stainless Steel Crucible Tongs100 Oz Crucible Details: Capacity: 100 Troy Ounces (of gold); other material volumes will vary. Exterior: Top Flange Diameter: 3.5''. Bottom Diameter: 3''. Height: 4.5''. Interior: Inner Diameter: 2.5''. Inner Depth: 3.8''.Please contact us with any questions. Thanks for looking!Includes: a 100 oz furnace flange, 100 oz graphite crucible, plus a pair of 13'' long stainless


6 PCS Package graphite melting crucible for 1 kilo electrical furance
By Generic
In Stock
$107.00

mpn: G.GM.1000SH, ean: 0739450575690,

4.7 out of 5 stars with 56 reviews
Size:65 x H125mmUsed for K1 electrical furanceMade of 1.85 high density graphite. Low ash content to maximally reduce oxidation reaction. CNC processing to make sure sizeaccuracy. Material has high heat conduction with fast melting speed.


SALAMANDER CRUCIBLE A-10 SUPER CLAY GRAPHITE CRUCIBLE A10 FOR NON FERROUS METAL NOVEL
By Salamander Supper A
In Stock
$89.50

mpn: 0317-110, ean: 0028841195570,

4.3 out of 5 stars with 37 reviews
CRUCIBLE SALAMANDER ''SUPER'' A10 Morgan MMS - CLAY GRAPHITE CRUCIBLE Salamander Crucible ''Super'' A10 is a high quality Clay Graphite crucible, consistent in performance, and has good thermal conductivity. It is widely used for the melting of metals in gas and electric melting furnaces. The clay graphite crucible manufactured by plastic forming techniques, retains heat longer and tolerates thermal shock when in a melting furnace of up to 2500oF. QUALITY SALAMANDER SUPER crucibles are



Viewing Page 2 of 9

View more products in Jewelry Casting Supplies.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - indiasilverbeads.com. All Rights Reserved.