INNICON 250g Resin Casting Molds Kit 22 Silicone Resin Snowflake Comb Angel Wings Crown Molds 12 Glitter Sequins 14x Open Back Bezels Traceless Tape with Lamp For DIY Charms Necklaces Earrings Making


INNICON 250g Resin Casting Molds Kit 22 Silicone Resin Snowflake Comb Angel Wings Crown Molds 12 Glitter Sequins 14x Open Back Bezels Traceless Tape with Lamp For DIY Charms Necklaces Earrings Making by INNICON at India silver beads. MPN: 250gx1+MJx22+ACRx12+MT+MN+WNZ_30. Hurry! Limited time offer. Offer valid only while supplies last. The package includes:5x Transparent epoxy resin 30ml;100x Golden eyelet rings for necklace making; 12x Molds: 5x Elongated mold for pendants making;1x Mold with 10 shapes to make pendants earrings etc.(gemstone-shaped); 1x Mold with 13 shapes to make pendants earrings etc.(02);1x Mold for bracelets with the rhombohedral finish, internal diameter 60mm, wide model;1x Mold for bracelets with the rhombohedral finish, internal diameter 60mm, slim model;1x Diamond-shaped mold, large;1x Diamond-shaped


Images:
INNICON 250g Resin Casting Molds Kit 22 Silicone Resin Snowflake Comb Angel Wings Crown Molds 12 Glitter Sequins 14x Open Back Bezels Traceless Tape with Lamp For DIY Charms Necklaces Earrings Making by INNICON (Image #1)
INNICON 250g Resin Casting Molds Kit 22 Silicone Resin Snowflake Comb Angel Wings Crown Molds 12 Glitter Sequins 14x Open Back Bezels Traceless Tape with Lamp For DIY Charms Necklaces Earrings Making by INNICON (Image #2)
INNICON 250g Resin Casting Molds Kit 22 Silicone Resin Snowflake Comb Angel Wings Crown Molds 12 Glitter Sequins 14x Open Back Bezels Traceless Tape with Lamp For DIY Charms Necklaces Earrings Making by INNICON (Image #3)
INNICON 250g Resin Casting Molds Kit 22 Silicone Resin Snowflake Comb Angel Wings Crown Molds 12 Glitter Sequins 14x Open Back Bezels Traceless Tape with Lamp For DIY Charms Necklaces Earrings Making by INNICON (Image #4)
INNICON 250g Resin Casting Molds Kit 22 Silicone Resin Snowflake Comb Angel Wings Crown Molds 12 Glitter Sequins 14x Open Back Bezels Traceless Tape with Lamp For DIY Charms Necklaces Earrings Making by INNICON (Image #5)
INNICON 250g Resin Casting Molds Kit 22 Silicone Resin Snowflake Comb Angel Wings Crown Molds 12 Glitter Sequins 14x Open Back Bezels Traceless Tape with Lamp For DIY Charms Necklaces Earrings Making by INNICON (Image #6)
INNICON 250g Resin Casting Molds Kit 22 Silicone Resin Snowflake Comb Angel Wings Crown Molds 12 Glitter Sequins 14x Open Back Bezels Traceless Tape with Lamp For DIY Charms Necklaces Earrings Making by INNICON (Image #7)
INNICON 250g Resin Casting Molds Kit 22 Silicone Resin Snowflake Comb Angel Wings Crown Molds 12 Glitter Sequins 14x Open Back Bezels Traceless Tape with Lamp For DIY Charms Necklaces Earrings Making by INNICON (Image #8)
INNICON 250g Resin Casting Molds Kit 22 Silicone Resin Snowflake Comb Angel Wings Crown Molds 12 Glitter Sequins 14x Open Back Bezels Traceless Tape with Lamp For DIY Charms Necklaces Earrings Making by INNICON (Image #9)
Brand: INNICON
4.9 out of 5 stars with 49 reviews
Condition: New
Availability: In Stock
$113.99


Quantity:  

 


View More In Casting Molds.

Product Description & Reviews

The package includes:5x Transparent epoxy resin 30ml;100x Golden eyelet rings for necklace making; 12x Molds: 5x Elongated mold for pendants making;1x Mold with 10 shapes to make pendants earrings etc.(gemstone-shaped); 1x Mold with 13 shapes to make pendants earrings etc.(02);1x Mold for bracelets with the rhombohedral finish, internal diameter 60mm, wide model;1x Mold for bracelets with the rhombohedral finish, internal diameter 60mm, slim model;1x Diamond-shaped mold, large;1x Diamond-shaped mold, small;1x Mold with 6 shapes to make rings.(animal-shaped);12x Glitters & Flakes;12x Dried flowers, multicolor;14x Open back bezels; 2x Glueless tapes(5m); 13x liquid pigment;1x Mini UV lamp (with USB cable);1x TweezersHow to use: 1. Get started with a jewelry mold and our resin, of course, you can add other accessories such as beads or glitter if you want.2. Simply press the bottle gently to let out the resin and deposit the amount that we need in the mold. If you want to add glitter or beads, you have to put them in the mold before the resin.3. Cure the epoxy with the UV/LED lamp for 2-4 minutes (if we are doing small pieces like the rings, otherwise it require more time to cure).4. Take out the result from the mold.*Tips:How to avoid bubbles:1. Before using the resin, place it upside down to prevent air bubbles from escaping during extrusion.2. Use a toothpick to concentrate the air bubbles on the surface of the resin. Puncture them with a pin or undo them by applying heat with a heat gun or a lighter.

Features & Highlights

  • Safe and environmental friendly: Non-toxic and environmental protection, Superb transparency and hardness
  • UV epoxy resin no need to mix, fast cure with UV torch or lamp, small quantity 2-4 minutes, putting the resin by thin layers is recommended.
  • Satisfaction Guarantee: If you have any doubts and questions about the order, Please feel free to contact us. We promise that we will help you resolve all the problems. Thanks for your kindly understanding and patience
  • Compact portable UV lamp with USB cable and time setting. Press the botton once for setting 45s, press twice for setting 60s.
  • 14 open back bezels of cute patterns including kittens, unicorns, christmas patterns, etc. Come with 2 tapes to help you use them better.

Additional Information

Brand:
INNICON
Manufacturer:
innicon
Category:
Casting Molds
MPN:
250gx1+MJx22+ACRx12+MT+MN+WNZ_30
UPC:
756171510625
Part Number:
250gx1+MJx22+ACRx12+MT+MN+WNZ_30
Publisher:
innicon

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by INNICON, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


INNICON 3X 30ML No Mixing UV Glue Epoxy Resin 15 Silicone Molds 13X Epoxy Tint 12X Sequins Glitters Lamp Tweezers 100 Screws Eye Pins For Pendants Earrings Bracelets Gemstone Charms
By INNICON
mpn: 30mlx5+MJx15+PGM+ACRx12+MN+WNZ_33, ean: 0756171510656,
The package includes: 5x Transparent epoxy resin 30ml; 100x Golden eyelet rings for necklace making; 15x Molds: 5x Elongated mold for pendants making; 2x Mold with 10 shapes to make pendants earrings etc.(gemstone-shaped); 1x Mold with 6 shapes to make rings.(animal-shaped); 1x Mold for bracelets with the rhombohedral finish, internal diameter 60mm, wide model; 1x Mold for bracelets with the rhombohedral finish, internal diameter 60mm, slim model; 1x Diamond-shaped mold, large; 1x

Concret Mould - Brick Wall Retro Ancient Plants Pot Making Silicone Mold Square Cement Planter Mould - Glass Ceramics Animals Goddess Kids Bowl Angel Leaves Cutters Jewelry Tools Molds Face Cupc
By M. BAMBOOBY
mpn: GS4S87T0YCUYR9017Y07,
Best Price for Concret Mould - Brick Wall Retro Ancient Plants Pot Making Silicone Mold Square Cement Planter Mould - Glass Ceramics Animals Goddess Kids Bowl Angel Leaves Cutters Jewelry Tools Molds Face Cupc - Good - Professional - Cheapest - Clay molds Reviews - Buy Online - High Quality - Cheap PriceSpecification:Unit Type: piece Package Weight: 0.7kg (1.54lb.) Package Size: 11cm x 11cm x 11cm (4.33in x 4.33in x 4.33in) Why should you choice Concret Mould - Brick Wall Retro Ancient Plants

Colour de Verre 2015 Vintage Ornaments Mold
By Stallings Stained Glass
Mold for fusing. THIS IS NOT A LISTING FOR A FINISHED ITEM! This is just the mold. Colour de Verre's Vintage Ornaments let's you create classic and modern looks. Make them flashy with dichroic Firestrips, frits, and flakes. Evoke classic looks with murini and millefiori. Add something new to you holiday season. The mold measures 5x9.5x1.25 inches (12.5x24x3 cm). The two ornaments hold 65 and 75 grams of frit. The finished pieces are 4 and 5.5 inches (10.5 and 14 cm) tall.Colour de Verre 2015

2.85kg (100 oz.) Copper Silver and Gold Melting loaf Ingot Mold
By Unknown
mpn: JMT-121, ean: 8907849016389,
Cast iron 2.85 kg (approx.) loaf ingot Mold is use for melting of precious metal such as gold silver brass as well as aluminium. As it contains taper portion in cavity part for easy removal. Cavity: 2.85 (approx. 100 oz.) Cavity length : 6.4'' Cavity width : 2.75'' Cavity depth : 1.6'' Total Length : 12'' Handle Length : 4.8'' ** Actual dimension will slightly different but product Characteristics remain same**.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - indiasilverbeads.com. All Rights Reserved.